Table of Contents
Advertisement
Versiv Series Cabling Certification Product Family
Users Manual
About the Asset Management Service
Change the Network Settings
352
Find Quality Products Online at:
LinkWare Live's asset management service lets you see the
locations of your Versiv and Versiv 2 testers in the field. The
owner of the LinkWare Live account can enable or disable the
service remotely for each tester.
When this service is enabled on a tester, the asset management
icon (
) shows on the tester's home screen. When a technician
uses the tester to sign in to LinkWare Live, the tester's location
shows on a map on LinkWare Live's ASSETS page.
You can enable or disable the asset management
service only with LinkWare Live. There is no setting
on the tester that enables or disables this service.
It is not usually necessary to change the wired or Wi-Fi network
settings before you try to make a connection. But for example if
you must use static addressing, you can get to the settings on the
NETWORK screen.
To get to the network settings
On the home screen, tap TOOLS, then tap Network, then tap the
Wired or Wi-Fi panel.
To test the settings
Tap CONNECT on the WI-FI PORT or WIRED PORT screen.
GlobalTestSupply
www.
Note
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
