Fluke Versiv Series Technical Reference Handbook page 481

A
B
C
D
E
 Tap SETUP to change the RANGE, PULSE WIDTH, AVERAGING
TIME, and wavelengths for the test. See "How to Quickly
Change OTDR Settings After a Test" on page 446. You can also
tap CURRENT to see the settings used on the test.
Tap or

The wavelength the tester used for the test. If the tester used

more than one wavelength, tap
wavelength. Possibly, some events show only at one
wavelength.
Chapter 12: The OptiFiber Pro HDR OTDR Module
F
Figure 174. HDR OTDR Trace
to move the cursor to another event.
HDR OTDR Results
G
or to see the other
J
I
H
GPU223.EPS
445