Fluke Versiv Series Technical Reference Handbook page 144

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
A
B
C
Figure 42. Twisted Pair Length Results
You can also measure length continuously. See
"Continuous Tests" on page 111.
PROPAGATION DELAY: The time taken for a test pulse to get

to the end of a wire pair.
DELAY SKEW: The differences in propagation delays between

the shortest delay and the delays of the other wire pairs. The
shortest delay shows as "0" in the delay skew results.
 The tester shows a limit for propagation delay and delay skew
if the measurements are required by the selected test limit.
For measurements not required, the limit shows as N/A.
108
Note
E
D
GPU68.EPS