Use Linkware Live To Update The Software; Update The Software In A Module - Fluke Versiv Series Technical Reference Handbook

Versiv Series Cabling Certification Product Family
Technical Reference Handbook

Use LinkWare Live to Update the Software

Use an appropriate cable to connect the tester's RJ45 Ethernet
1
port to a network port or connect a Wi-Fi adapter to the
tester's type A USB port.
On the home screen, tap SYNC.
2
For a wireless network, if the network selection screen shows,
3
connect to a network:
a. Select a network.
b. Enter security information.
c. Go back to the previous screen, then tap CONNECT.
d. Go back to the home screen, then tap SYNC.
On the LWL SIGN IN screen, enter the ID and password for
4
your LinkWare Live account, then tap SIGN IN.
If a software update is available, the tester shows a message.
5
Tap YES to install new software in your tester.
The tester reboots when the update is completed.
6
To install the update in a remote or another main tester, use
7
the USB cable provided to connect the updated main tester to
the other tester. See Figure 210.
Follow the instructions shown on the display of the updated
8
main tester.

Update the Software in a Module

To update the software in a module, attach it to a tester that has
the latest software. The tester automatically installs the software
in the module.
594