Fluke Versiv Series Technical Reference Handbook page 624

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
A
B
C
Figure 208. VERSION INFORMATION Screen for the Main Tester
Tap MODULE to see the Serial Number, Software version, and

Calibration Date of the attached module.
The software version of the module is not the same as the
version of the main tester. Most software updates affect the
software only in the main tester, so the main tester's version
number is higher than the module's.
The Calibration Date is the date when the module was
calibrated at a Fluke Networks factory or service center.
If the module was used for the first time within 6 months after it
was calibrated during manufacturing, Calibration Start Date
588
D E F
GUP57.EPS