Chapter 9 Certify Fiber Cabling; Overview Of The Certifiber Pro Optical Loss Test Set Modules - Fluke Versiv Series Technical Reference Handbook

Chapter 9: Certify Fiber Cabling
Before you use the tester, read the safety
information that starts on page 6.
Overview of the CertiFiber Pro Optical Loss
Test Set Modules
The Fluke Networks CertiFiber
modules attach to Versiv
to make rugged, hand-held testers that let you certify,
troubleshoot, and document optical fiber cabling installations.
The testers include these features:
Measures optical power loss and length on dual-fiber,

multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber singlemode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.
 Interchangeable connector adapters on input and output
ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.
Visual fault locator helps you find breaks, bad splices, and

bends and verify fiber continuity and polarity.
W X*
Warning
®
Pro Optical Loss Test Set (OLTS)
™ and Versiv 2 main and remote testers
233