Ac Adapter And Battery - Fluke Versiv Series Technical Reference Handbook

LOW BATTERY LED comes on when the battery is low. The LEDs
also have these functions:
 Battery gauge (see Figure 3 on page 20)
Volume indicator for the TALK function

Progress indicator for software updates

Bay for modules, such as the DSX CableAnalyzer, CertiFiber Pro,

or OptiFiber Pro modules.
: Starts a test.

 : Power button. Versiv 2: The LED in the button shows the
status of the battery charging process. See Table 2 on
page 18.
: Press  to use the headset to speak to the person at

the other end of the link. Press again to adjust the volume. To
turn off the talk function, hold down .
Connector for the AC adapter. Versiv: The LED is red when the

battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See "Charge the
Battery" on page 18.
Micro USB port: This USB port lets you connect the tester to a PC

so you can install software updates in the tester.
Headset jack. See "How to Use the Talk Function" for the DSX-

CableAnalyzer on page 157 or for the CertiFiber Pro OLTS on
page 293.

AC Adapter and Battery

You can use the ac adapter (model PWR-SPLY-30W) or the lithium
ion battery (model VERSIV-BATTERY) to supply power to the
tester.
To remove the battery, see "Remove the Battery" on page 595.
Chapter 1: Get Acquainted
AC Adapter and Battery
17