Fluke Versiv Series Technical Reference Handbook page 293

Loss/Length Settings for Limits that Calculate a Loss Limit
D
E
F
G
Figure 108. Screen to Set the Number of Connectors,
Enter the number of splices that are in each path of the

:
Splices
link.

Jumper Reference
each fiber path when you set the reference. The dotted lines in
the diagram on the screen show you which parts of the link are
included in the test results. See Reference Method on page 255.
The dotted lines show you which parts of the link are included in

the test results.
Splices, and Jumpers
Enter the number of jumpers you will use in
:
Chapter 9: Certify Fiber Cabling
A
B
C
H
GPU140.EPS
257