The Optifiber Pro Otdr Module; Overview Of The Otdr Module - Fluke Versiv Series Technical Reference Handbook

Chapter 11: The OptiFiber Pro OTDR

Overview of the OTDR Module

Before you use the OTDR module, read the safety
information that starts on page 6.
The OptiFiber
Reflectometers that locate, identify, and measure reflective and
loss events in multimode and singlemode fibers. Typical maximum
test ranges are 35 km maximum at 1300 nm for multimode fiber
and 130 km maximum at 1550 nm for singlemode fiber. The
modules include these features:
Automatic analysis of OTDR traces and events helps you

identify and locate faults on multimode (850 nm and
1300 nm; 50 μm and 62.5 μm) and singlemode (1310 nm and
1550 nm) fiber.
Shows OTDR results as an intuitive map of events, a table of

events, and an OTDR trace.
Automatic bi-directional averaging gives you more accurate

loss measurements than measurements made in one
direction.
"Document Only" test limit is available if PASS/FAIL results are

not necessary.
Event editing function lets you edit loss events. See Chapter

13.
Span function lets you limit OTDR results to a section of fiber

that you define. See Chapter 13.
W
Warning
® Pro OTDR modules are Optical Time Domain
X*
Module
303