Fluke Versiv Series Technical Reference Handbook page 541

accuracy uncertainty for the tester. See "PASS*/FAIL* Results" on
page 98.
IDs can contain multiple results. So, these numbers
can be more than the number of IDs saved.
The cable IDs that have FAIL results and must be tested again.

Because some IDs can have one or more tests that failed, the
number at the top of this screen (
number of retests needed.
The copper cable IDs that have measurements within the range

of accuracy uncertainty for the tester. See "PASS*/FAIL* Results"
on page 98.
 The cable IDs that have an overall PASS or
some IDs can have one or more tests that passed or have an
status, the number at the top of this screen (
than the number of passes.
IDs that start with "TRC" are from verification tests on fiber
test reference cords. These IDs show the date and time of the
test.
Tap VIEW ALL to see a summary of the results in all the projects

in the tester.
TRANSFER lets you export or import results to or from a flash

drive, and delete results on the flash drive. The TRANSFER
function also lets you sync project setups and results with
LinkWare Live.
 Tap MANAGE to delete or rename results that are in the tester.
The icons show the types of fiber test results that the result

contains:
No icon: DSX CableAnalyzer results from copper cabling.
Loss/length results from a CertiFiber Pro OLTS module.
Chapter 16: Manage Test Results
Note
 ) can be more than the
View Saved Results
result. Because
) can be more

505