Advertisement
6. Examine the Results
The tester shows a summary of the test results for the fibers
(Figure 4, left). To see more information (Figure 4, right), tap
the window for a fiber.
7. Save the Results
•
If Auto Save is on, the tester uses the next two IDs to save
the results for the two fibers.
•
If Auto Save is off, tap SAVE if the test passed or FIX LATER
if the test failed. The SAVE RESULT screen shows the next
two IDs available. You can change the IDs if necessary.
The tester saves the results in the DEFAULT project, unless you
selected a different project.
About Projects
You can set up a project to specify the settings and tests
necessary for a job, monitor the status of a job, and organize the
test results.
To start a new project, tap PROJECT on the home screen, tap
CHANGE PROJECT, then tap NEW PROJECT. See the Users Manual
or Technical Reference Handbook for more information.
cts Online at:
Figure 4. Examples of Fiber Test Results Screens
GlobalTestSupply
www.
HGP02.EPS
.com
sales@Glob
Advertisement
