Upgrade the Software on the S8300
Note: If you are using the LSP/G700 Upgrade Tool, the Upgrade Tool performs this task
automatically.
Follow the steps in this section to upgrade the S8300 to the most recent load of software.
Once you have transferred the updated S8300 software file (with a .tar extension) to the S8300 Media
Server, the software is available to be installed.
!
CAUTION:
For a new installation, be sure to set the time and time zone before installing the S8300
software. Failure to do so may cause network problems.
Install New Software
Log in to the S8300 Web interface.
1.
Choose
2.
Install New Software Release
pane of the main menu.
The S8300 displays the Choose Software screen.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
5 Upgrading an Existing G700 with an S8300: Upgrade the Software on the S8300
under Server Configuration and Upgrades from the left
221