Avaya J100 Series Installing And Administering page 92

Security configurations
Parameter
MYCERTDN
MYCERTKEYLEN
MYCERTRENEW
MYCERTWAIT
MYCERTCAID
SCEPPASSWORD
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Type Default Description
value
String Null Specifies the common part of SUBJECT in SCEP
certificate request. This value defines the part of
SUBJECT in a certificate request including
Organizational Unit, Organization, Location, State, and
Country that is common for requests from different
devices.
Numeric 2048 Specifies the private key length in bits to be created in
the device for a certificate enrollment. The range is from
1024 to 2048.
Numeric 90 Specifies the percentage used to calculate the renewal
time interval out of the device certificate's Validity Object.
If the renewal time interval has elapsed, the phone starts
to periodically contact the SCEP server again to renew
the certificate. The range is from 1 to 99.
Numeric 1 Specifies the functions of the device when performing
certificate enrolment. The options are:
• 0: Periodical check in the background
• 1: Wait until a certificate or a denial is received or a
pending notification is received
String CAIdenti Specifies the Certificate Authority Identifier. Certificate
fier Authority servers might require a specific CA Identifier
string to accept GetCA requests. If the device works with
such a Certificate Authority, the CA identifier string can
be set through this parameter.
String $SERIA Specifies a challenge password to use with SCEP. The
LNO value of SCEPPASSWORD, if non-null, is included in a
challengePassword attribute in SCEP certificate signing
requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO. If the value contains
$MACADDR, $MACADDR is replaced by the value of
MACADDR without the colon separators.
Comments on this document? infodev@avaya.com
setup 92