Parameter name
CALLFWDDELAY
CALLFWDSTAT
COVERAGEADDR
Call Park
The Call Park feature is used to put an active call on hold at a parking extension and to retrieve
the same parked call from another phone in the organization.
Voicemail
The Voicemail feature is used to dial the configured voice mail number to receive a voice
message.
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Default value
0
Null
setup
Comments on this document? infodev@avaya.com
Description
Sets the number of ring cycles
before the call is forwarded to the
forward or coverage address. The
default delay is one ring cycle.
Sets the call forwarding mode of
the phone by summing the
following values:
• 0: Disables call forwarding.
• 1: Permits unconditional call
forwarding.
• 2: Permits call forward on busy.
• 4: Permits call forward/no
answer.
Example: a value of 6 allows call
forwarding on busy and on no
answer.
Note:
This parameter is supported
when failed over from Aura
SM to a non-Aura survivable
server (excluding BSM).
Sets the address to which calls
will be forwarded for the call
coverage feature.
Users can change or replace this
administered value if
CALLFWDSTAT is not 0.
Call Park
109