Configuring the phone using web interface
Settings field descriptions
Language
Name
Language
Available Language File
Import Language File
Language file to upload
Phone Language
Feature Access
Call Forward
Number of Ring cycle before Call
Forward
Do Not Disturb
DND Priority over Call Forward
(Unconditional, Busy)
Auto Answer
Mute on Auto Answer
Hold Reminder Timer
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
Specifies the name of the default system language file used in
the phone.
You can delete the default language file by clicking Delete.
You can browse and import a language file from your local
machine by clicking Choose File > Import.
Specifies the language file to be uploaded.
Specifies the phone language file.
Specifies the status of the call forward feature .
The options are:
• Do not allow
• Allow
Specifies the number of ring cycles before the call is forwarded
The default delay is one ring cycle.
Specifies the status of the DND feature .
The options are:
• Do not allow
• Allow
Specifies the IP address of the gateway. You can type or ethe
gate way IP address in this field.
Specifies the status of the Auto Answer feature.
The options are:
• Do not allow
• Allow
Specifies the mute status when Auto Answer feature is enabled.
The options are:
• Yes
• No
Specifies the number of seconds after which the phone plays
the hold reminder tone .
setup
Comments on this document? infodev@avaya.com
Table continues...
66