Avaya J100 Series Installing And Administering page 175

Parameter name
VLANTEST
W
WAIT_FOR_INVITE_RESPONSE_TIMEOUT
WAIT_FOR_REGISTRATION_TIMER
WAIT_FOR_UNREGISTRATION_TIMER
WARNING_FILE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
60
60
32
32
Null
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Note:
This parameter is configured
through the settings file.
Specifies the number of seconds that
the phone waits prior to failing back to
a different VLAN ID if no response is
received from the DHCP server.
Valid values are 0 through 999.
A value of zero means that DHCP tries
with a non-zero VLAN ID forever.
Note:
This parameter is configured
through:
• Settings file
• A name equal to value pair in
DHCPACK message
Specifies the maximum number of
seconds that the phone waits for
another response after receiving a SIP
100 Trying response.
Valid values are 30 through 180.
Specifies the number of seconds that
the phone waits for a response to a
REGISTER request.
If no response message is received
within this time, registration will be
retried based on the value of
RECOVERYREGISTERWAIT.
Valid values are 4 through 3600.
Specifies the number of seconds the
phone waits before assuming that an
un-registration request is complete.
Un-registration includes termination of
registration and all active dialogs.
Valid values are 4 through 3600.
Specifies the file name or URL for a
custom single-channel WAV file coded
in ITU-T G.711 u-law or A-law PCM
Table continues...
175