Avaya J100 Series Installing And Administering page 18

Initial setup and connectivity
Parameter Name
ENABLE_NETWORK_CONFIG_
BY_USER
WLAN_ESSID
WLAN_SECURITY
WEP_DEFAULT_KEY
WLAN_COUNTRY
WLAN_ENABLE_80211D
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default Value
1
N/A
none
N/A
US
0
setup
Comments on this document? infodev@avaya.com
Description
defined in the 46xxsettings.txt
parameter WLAN_ESSID
Enables network configuration to
be modified by the user.
Value operation:
• 0: Disabled
• 1: Enabled
Specifies the wireless network to
be used.
The name of the SSID ranges up
to 32 characters.
Specifies the security standard to
be used for the wireless network.
Value operation:
• none: No security standard is
defined.
• wep: WEP security standard is
defined.
• wpa2psk: WPA2 security
standard with pre-shared key is
defined.
• wpapsk: WPA security standard
with pre-shared key is defined.
• wpa2e: WPA enterprise security
standard is defined.
Specifies the index of WEP
default key.
Value operation:
• 1
• 2
• 3
• 4
Specifies the ISO country code
representing the Wi-Fi regulatory
domain.
Enables the phone to configure
its Wi-Fi regulatory domain to
match the 802.11d.
Table continues...
18