Avaya J100 Series Installing And Administering page 53

• SNTP SYNC Interval: Type the SNTP synchronization time interval to re-synchronize
the phone's local time . The valid time interval is from 60 to 2880 minutes. The default
synchronization time is 1440 minutes.
• GMT Offset: Type the GMT Offset value in hours and minutes between the local
standard time and Greenwich Mean Time (GMT). The offset value ranges from 0:00 to
±12:59.
4. In the Daylight Saving area, configure the following:
• Daylight Saving Mode: The options are :
- Automatic daylight saving time:
- Manual daylight saving activated (time set to DSTOFFSET):
- Manual daylight saving adjustment (as specified by DSTSTART and DSTSTOP):
• DST Offset: Specifies the offset time between standard time and daylight savings time.
The options are:
- 0
- 1 hour
- 2 hour
• DST Start: Specifies the daylight savings time start date and time with a format of either
odddmmmht or Dmmmht; where:
- o represents a one-character ordinal adjective. For example, 1 for first, 2 for second,
3 for third, 4 for fourth, or L for last.
- D represents 1 or 2 ASCII digits or character representing the date of the month.
- ddd represents a three-characters containing the English abbreviation for the day of
the week. For example, Sun for Sunday, Mon for Monday.
- mmm represents a three-character English abbreviation for the month. For example,
Jan for January, Feb for February.
- h represents one-numeric digit representing the time to make the adjustment at hAM
(0h00 in military format).
The valid values of h are "0" to "9";
- t represents one-character for the time zone to which to make the adjustment. For
example, "L" for local time or "U" for Universal Time.
• DST Stop: Specifies the daylight savings time stop date and time with a format of either
odddmmmht or Dmmmht; where:
- o represents a one-character ordinal adjective. For example, 1 for first, 2 for second,
3 for third, 4 for fourth, or L for last.
- D represents 1 or 2 ASCII digits or character representing the date of the month.
- ddd represents a three-characters containing the English abbreviation for the day of
the week. For example, Sun for Sunday, Mon for Monday.
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
setup
Comments on this document? infodev@avaya.com
Configuring date and time
53