Avaya J100 Series Installing And Administering page 147

Parameter name
LOCALLY_ENFORCE_PRIVACY_HEADER
LOG_CATEGORY
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
Null
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
• 3: Error, Critical, Alert and
Emergency events are logged
(default).
• 4: Warning, Error, Critical, Alert and
Emergency events are logged.
• 5: Notice, Warning, Error, Critical,
Alert and Emergency events are
logged.
• 6: Informational, Notice, Warning,
Error, Critical, Alert and Emergency
events are logged.
• 7: Debug, Informational, Notice,
Warning, Error, Critical, Alert and
Emergency events are logged
Warning:
Setting the value to 7 can impact
the performance of the phone
because of the number of events
generated.
Specifies whether the phone displays
Restricted instead of CallerId
information when a Privacy header is
received in a SIP INVITE message for
an incoming call.
Value Operation
• 0: Disabled. CallerID information is
displayed.
• 1: Enabled. Restricted is displayed.
Specifies a list of categories of events
to be logged through syslog and
locally.
This parameter must be specified to
log events below the Error level.
The list can contain up to 255
characters.
Category names are separated by
commas without any intervening
spaces.
H1xx SIP R1.0 and later; the default is
ALL which implies all categories.
Table continues...
147