Avaya J100 Series Installing And Administering page 41

Third-party call control setup
Hide thumbs Also See for J100 Series:
Table of Contents

Advertisement

Option
Option 3
Option 6
Option 12
Option 15
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
Specifies the gateway IP address list. The list can contain up to 127 total ASCII
characters. Separate more than one IP address with commas with no intervening
spaces.
Specifies the DNS server address list. The list can contain up to 127 total ASCII
characters. Separate more than one IP address with commas with no intervening
spaces.
The phone supports DNS and the dotted decimal addresses. The phone attempts to
resolve a non-ASCII-encoded dotted decimal IP address by checking the contents of
DHCP Option 6. At least one address in option 6 must be a valid, nonzero, dotted
decimal address, otherwise the DNS address fails.
Specifies the host name.
AVohhhhhh, where:
• AV stands for Avaya.
• o is one of the following values based on Object Unique Identifier (OUI) derived
from the first three octets of the phone MAC address:
- A if OUI is 00-04-0D
- B if OUI is 00-1B-4F
- E if OUI is 00-09-6E
- L if OUI is 00-60-1D
- T if the OUI is 00-07-3B
- X if the OUI is anything else
• hhhhhh are the ASCII characters for the hexadecimal representation of the last
three octets of the phone MAC address.
Specifies the domain name. The domain name is required to resolve DNS names
into IP addresses.
Configure this option if you use a DNS name for the HTTP server. Otherwise, you
can specify a domain as part of customizing the HTTP server.
This domain name is appended to the DNS addresses specified in option 6 before
the phone attempts to resolve the DNS address. The phone queries the DNS
address in the order they are specified in option 6. If there is no response from an
address, the phone queries the next DNS address.
As an alternative to administering DNS by DHCP, you can specify the DNS server
and domain name in the HTTP script file. If you use the script file, you must
configure the DNSSRVR and DOMAIN parameters so that you can use the values of
these parameters in the script.
Note:
Administer option 6 and option 15 appropriately with DNS servers and domain
names respectively.
Comments on this document? infodev@avaya.com
setup
Phone installation
Table continues...
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J139J129J169J179Jbm24

Table of Contents