Avaya J100 Series Installing And Administering page 140

Appendix
Parameter name
FORCE_SIP_EXTENSION
FORCE_SIP_PASSWORD
FORCE_SIP_USERNAME
FORCE_WEB_ADMIN_PASSWORD
FQDN_IP_MAP
G
G726_PAYLOAD_TYPE
GMTOFFSET
GROUP
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
Null
Null
Null
Null
Null
110
0:00
0
setup
Comments on this document? infodev@avaya.com
Description
Value Operation
• 0: (Default). Disables FIPS-140
approved cryptographic algorithms.
• 1: Enables only FIPS-140 approved
cryptographic algorithms.
Specifies whether the phone prompts
to enter the User ID after the phone
powers up..
Specifies whether the phone prompts
to enter the password after the phone
powers up.
Specifies whether the phone prompts
to enter the username after the phone
powers up.
This parameter enables the user to
force login to the phone during the
staging process, prior to the phone's
deployment
Specifies the password to access the
phone through Web as Administrator.
Valid values are 8 to 31 alphanumeric
characters.
Specifies to validate an FQDN
contained in the certificate when IP
address is used to establish the
connection. The valid range is 0 to 255
characters. The URL must be an
HTTPS address.
Specifies the RTP payload type to be
used for the G.726 codec.
Valid values are 96 through 127.
Specifies the time offset from GMT in
hours and minutes.
The format begins with an optional +
or - (+ is assumed if omitted), followed
by 0 through 12 (hours), followed by a
colon (:), followed by 00 through 59
(minutes).
Specifies specifically-designated
groups of phones by using IF
Table continues...
140