Avaya J100 Series Installing And Administering page 71

Name
Dialing
No Digit Dial Timer
Inter-digit Wait Timer
Dial Local Area Code
Local Area Code
Enhanced Local Dialing Rules
Enable Local Dialing Rules
Country Code
International Access Code
Long Distance Access Code
Internal Extension Number Length
National Telephone Number Length
Outside Line Access Code
Remove PSTN access prefix from
outgoing number
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• European
Specifies the number of seconds that the telephone waits for a
digit to be dialed after going off-hook and before generating a
warning tone.
The valid range is 0 to 60 seconds.
Specifies the number of seconds that the telephone waits after
a digit is dialed before sending a SIP INVITE.
The valid range is 1 to 10 seconds.
Specifies whether the user must dial the area code of calls
within the same area code.
The options are:
• No
• Yes
Specifies the local area code of the phone.
Specifies whether to process telephone numbers from the
incoming Call Log or Contacts while dialling a number.
The options are:
• Disable
• Enable Without Contacts
• Enable With Contacts
Specifies the country code of the user.
Specifies the international access code.
Specifies the long distance access code.
Specifies the length of an internal extension number.
The valid range is 3 to 13 numeric digits.
Specifies the length of a national telephone number.
The valid range is 5 to 15 numeric digits.
Specifies the pre-fixed number to be used to make a local call
by using a public network.
Specifies the removal of the PSTN access prefix from the
outgoing number.
The options are:
• No
• Yes
setup
Comments on this document? infodev@avaya.com
Configuring settings
Table continues...
71