Avaya J100 Series Installing And Administering page 133

Parameter name
ENABLE_CONTACTS
ENABLE_DND
ENABLE_DND_PRIORITY_OVER_CFU_CFB
ENABLE_EARLY_MEDIA
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
1
1
0
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
• 1: Yes
Specifies if the contacts application
and associated menus are available
on the phone.
Value Operation
• 0: No
• 1: Yes
Specifies that the do-not-disturb
feature is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Note:
This parameter is only applicable
if a 3PCC environment is
configured.
Specifies that the Do-not-disturb
(DND) feature is given priority over
Call forwarding unconditionally (CFU)
and Call forwarding busy (CFB).
Value Operation
• 0: Disabled
• 1: Enabled
Note:
This parameter is only applicable
if a 3PCC environment is
configured.
Specifies if the phone sets up a voice
channel to the called party before the
call is answered.
Value Operation
• 0: No
• 1: Yes
Setting this parameter to 1 can speed
up call setup.
Table continues...
133