Parameter name
DISPLAY_SSL_VERSION
DNSSRVR
DOMAIN
DOT1X
DOT1XEAPS
DOT1XSTAT
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
Null
MD5
0
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Note:
Set the parameter to 0 for 3PCC
environment.
Specifies whether OpenSSL and
OpenSSH versions are displayed in
the Admin menu.
Value Operation
• 0: OpenSSL and OpenSSH versions
are not displayed.
• 1: OpenSSL and OpenSSH versions
are displayed.
Specifies the domain name of the
server for Access Profile 2.
Specifies a character string that will be
appended to parameter values that
are specified as DNS names, before
the name is resolved.
The value can contain 0 to 255
characters. The default value is null.
Specifies the 802.1X pass-through
operating mode.
Pass-through is the forwarding of
EAPOL frames between the phone's
ethernet line interface and its
secondary (PC) ethernet interface
Value Operation
• 0: EAPOL multicast pass-through
enabled without proxy logoff.
• 1: EAPOL multicast pass-through
enabled with proxy logoff.
• 2: EAPOL multicast pass-through
disabled.
Specifies the authentication method to
be used by 802.1X.
Valid values are MD5, and TLS.
Specifies the 802.1X supplicant
operating mode.
Value Operation
Table continues...
129