Avaya J100 Series Installing And Administering page 25

Method
Web UI
DHCP
LLDP
Settings file
Administration
menu on the
phone
Precedence of the methods
Most of the parameters are configured through multiple methods. If you configure a parameter
through more than one method, the device applies the settings of the method that has a higher
precedence. The following list shows the precedence of the methods in the highest to lowest
order:
1. Administration menu on the phone. When the parameter USE_DHCP is set to 1, the phone
gets the DHCP values from the DHCP rather than admin menu of the phone.
2. Settings file.
3. DHCP.
4. LLDP. There is an exception of LLDP getting a higher precedence than the Settings file
and DHCP when the layer 2 parameters, such as L2QVLAN, L2Q, L2QAUD, L2QVID,
L2QSIG, DSCPAUD, DSCPSIG, DSCPVID, and PHY2VLAN are set through LLDP.
Note:
When parameters of the Settings file are removed, or are not used, they reset to their default
value.
Related links
Phone installation without DES
Installation checklist
Use this checklist to gather, record, and verify the information during the installation.
No. Task
1 Check the prerequisites
2 Administer the VLAN
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
IP addresses Tagging and
VLAN
—
—
on page 24
Comments on this document? infodev@avaya.com
Can administer
Network Time Quality of
Server Service
—
—
— —
Reference
Prerequisites on page 24
VLAN overview
setup
Phone installation
Application-
specific
parameters
—
on page 27
Table continues...
25