Configuring the phone using web interface
SIP settings field descriptions
Name
SIP Account
Status
SIP User ID
Authentication User ID
Authentication Password
SIP Server
SIP Domain
Use Proxy Server
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
Displays the SIP account status. The field is automatically populated.
The values are:
• Not Configured
• Not Registered
• Registered
Specifies the SIP user ID provided by the service provider.
You can also type the SIP user ID, which is a combination of the following
values:
• Upper and lower case characters
• Numbers from 0 to 9
• Spaces
• Special characters
Specifies the authentication ID.
You can also type the authentication user ID in this field if authentication is
enabled on the SIP server.
The authentication user ID is a combination of the following values:
• Upper and lower case characters
• Numbers from 0 to 9
• Spaces
• Special characters
Specifies the authentication password.
You can also type the password in this field if authentication is enabled on
the SIP server.
Note that the password can contain maximum 31 ASCII characters.
Specifies the SIP domain used for SIP registration.
Valid values are 0 to 255 ASCII characters.
Specifies whether SIP proxy servers are read-only or can be edited.
The options are:
• Manual: To configure SIP proxy server manually by using the phone or
the web interface.
setup
Comments on this document? infodev@avaya.com
Table continues...
76