Configuring Voicemail By Using The Web Interface; Voicemail Configuration - Avaya J100 Series Installing And Administering

Feature configuration

Configuring Voicemail by using the web interface

About this task
To configure the Voicemail list using the web interface, do the following steps:
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click SIP.
3. In the Miscellaneous area, specify the number to access the voice mail in a non-Avaya
environment.
4. Click one of the following:
• Save
• Reset to Default
• Help

Voicemail configuration

Use the 46xxsettings file to set the following parameters:
Parameter name
SOFTKEY_CONFIGURATION
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default value
0,1,2
setup
Comments on this document? infodev@avaya.com
Description
Specifies which feature will show
up on which softkey on the Avaya
J100 Series IP Phones screens.
The features are defined as
follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
110