Avaya J100 Series Installing And Administering page 134

Appendix
Parameter name
ENABLE_EXCHANGE_REMINDER
ENABLE_G711A
ENABLE_G711U
ENABLE_G722
ENABLE_G726
ENABLE_G729
ENABLE_IPOFFICE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
1
1
1
1
1
0
setup
Comments on this document? infodev@avaya.com
Description
Specifies whether or not exchange
reminders will be displayed.
Value Operation
• 0: Not displayed
• 1: Displayed
Specifies if the G.711 a-law codec is
enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Specifies ifr the G.711 mu-law codec
is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Specifies if the G.722 codec is
enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Specifies if the G.726 codec is
enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Specifies if the G.729A codec is
enabled.
Value Operation
• 0: Disabled
• 1: Enabled without Annex B support
(default).
• 2: Enabled with Annex B support.
Specifies whether the J100 phone can
operate in 2 different modes with IP
Office. The first mode allows native
Table continues...
134