Broadsoft Device Management; Device Management Configuration - Avaya J100 Series Installing And Administering

Initial setup and connectivity

Broadsoft Device Management

With the Broadsoft Device Management feature, you can download device-specific configuration
files from the BroadWorks server in Avaya J100 Series IP Phones.The phone does not require a
third-party provisioning server and connects automatically to the Broadsoft server.
You must have a user name and password to access the configuration files in the BroadWorks
server.
To support Broadsoft Device Management feature, the phone must support:
• HTTP Authentication.
• HTTP redirection using "302 Found".
• SIP NOTIFY request from the Broadsoft server to access or reset the device.

Device management configuration

The configuration parameter for the Broadsoft Device Management is:
Parameter name
ENABLE_OOD_RESET_NOTIFY
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default Value
0
setup
Comments on this document? infodev@avaya.com
Description
Specifies whether the phone
supports Out Of Dialog (OOD)
SIP NOTIFY message with
Event:resync or Event:check-sync
only.
Value operation:
• 0: OOD is not supported.
• 1: OOD is supported.
The phone restart using SIP
NOTIFY request.
50