Call Forward; Configuring Call Forward By Using The Web Interface; Call Forward Configuration - Avaya J100 Series Installing And Administering

Feature configuration

Call Forward

The Call Forward feature is used to divert incoming calls to another number. The call forward
types are:
• Call Forward: Forwards all incoming calls to another number.
• Call Forward Busy: Forwards incoming calls to another number if the phone line is busy.
• Call Forward No Answer: Forwards incoming calls that are not answered within a stipulated
time to another number.

Configuring Call Forward by using the web interface

About this task
Use this procedure to enable or disable the call forward option through the web.
Procedure
1. Log in to the web interface .
2. In the navigation pane, click Settings.
3. Click Feature access.
4. In the Call Forward field, click one of the following :
• Allow: To enable the call forward option.
• Do not allow: To disable the call forward option.

Call Forward configuration

Use 46xxsettings.txt file to set the following parameters.
Parameter name
CALLFWDADDR
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default value
Null
setup
Comments on this document? infodev@avaya.com
Description
Sets the address to which calls
are forwarded for the call
forwarding feature.
Users can change or replace this
administered value if
CALLFWDSTAT is not 0.
Note:
This parameter is supported
when failed over from Aura
SM to a non-Aura survivable
server (excluding BSM).
Table continues...
108