Avaya J100 Series Installing And Administering page 121

Parameter name
AUTHCTRLSTAT
AUTO_ANSWER_MUTE_ENABLE
AWAY_TIMER
AWAY_TIMER_VALUE
B
BACKGROUND_IMAGE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
1
1
30
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Specifies that the enhanced
debugging capabilities are activated
from an SSH server by an AVAYA
engineer.
Value operation:
• 0: Enhanced debugging capabilities
are disabled.
• 1: Enhanced debugging capabilities
are enabled.
Note:
The parameter must be set to 1
only for the debugging period.
Set the parameter back to 0
when debugging is complete.
Specifies the status of the mute
function for the auto-answered calls.
Value operation:
• 0: Disabled
• 1: Enabled
Specifies whether the phone must
report an away state.
Value operation:
• 0: Disabled.
• 1: Enabled.
Specifies the number of minutes of
idle time after which the phone
assumes that the user is away from
the phone.
Valid values are from 1 to 1500
minutes.
Specifies custom background images
that can be loaded from the
provisioning server.
Phone supports up to 5 background
images with the following limitation:
• Only jpeg format files are supported.
• The maximum file size is 256 KB.
Table continues...
121