Avaya J100 Series Installing And Administering page 22

Initial setup and connectivity
2. Attach one end of the Ethernet cable to the 10/100 network port of the phone and the other
end to the wall jack.
3. Attach the phone to the wall mount bracket by inserting the two upper tabs of the wall
mount bracket into the slots on the back of the phone. The lower pair of tabs rest against
the back of the phone and ensure that the phone does not move when the keys are
pressed.
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
setup
Comments on this document? infodev@avaya.com
22