Avaya J100 Series Installing And Administering page 150

Appendix
Parameter name
MUTE_ON_REMOTE_OFF_HOOK
MYCERTCAID
MYCERTCN
MYCERTDN
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
1
CAIdentifier
$SERIALNO
Null
setup
Comments on this document? infodev@avaya.com
Description
Controls the speakerphone muting for
a remote-initiated (a shared control or
OOD-REFER) speakerphone off-hook.
Value Operation
0: the speakerphone is unmuted
1: the speakerphone is muted
Specifies an identifier for the CA
certificate with which the SCEP
certificate request is to be signed, if
the server hosts multiple Certificate
Authorities.
The value can contain zero to 255
ASCII characters.
Specifies the Common Name (CN)
used in the SUBJECT of an SCEP
certificate request.
The value must be a string that
contains either $SERIALNO" (which
will be replaced by the phone's serial
number) or $MACADDR (which will be
replaced by the phone's MAC
address), but it can contain other
characters as well, including spaces.
The value can contain eight
($MACADDR) to 255 characters.
Specifies the part the SUBJECT of an
SCEP certificate request that is
common for all phones.
The value must begin with a / and can
include Organizational Unit,
Organization, Location, State and
Country.
The value can contain Zero to 255
ASCII characters.
Note:
/ must used as a separator
between components. Commas
do not work with some servers
Table continues...
150