Configuring the phone using web interface
Name
Log Categories
Enhanced Debugging
SNMP
SNMP String
SNMP Address
RTCP Monitoring
RTCP Monitor Address
RTCP Monitor Port
RTCP Monitoring Report
Period
Phone Report
Maintenance Server Address
SSH
SSH Allowed
SSH Idle Timeout
August 2018
Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• Warnings
• Notices
• Information
• Debug
The default value is Emergencies.
Specifies the list of log categories. need more info
Specifies the status of enhanced debugging .
The options are:
• Enable
• Disable
Specifies the SNMP community name string.
The string contains maximum 32 ASCII characters.
Specifies the IP addresses for SNMP queries.
The address contains maximum 255 ASCII characters.
Specifies the IP or DNS address of the RTCP monitor.
The address contains maximum 255 ASCII characters.
Specifies the RTCP monitor port number.
Valid values are 0 through 65535 ASCII characters.
The default value is 5005.
Specifies the interval for sending out RTCP monitoring reports.
Valid values are 5 through 30 seconds.
The default value is 5 seconds.
Specifies the file server address to send the phone report.
The address contains maximum 255 ASCII characters.
Specifies whether Secure Shell (SSH) is supported.
The options are:
• Enable
• Disable
Specifies the time after which SSH is disabled. discuss
setup
Comments on this document? infodev@avaya.com
Table continues...
82