Avaya J100 Series Installing And Administering page 135

Parameter name
ENABLE_MLPP
ENABLE_MODIFY_CONTACTS
ENABLE_MULTIPLE_CONTACT_WARNING
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
support of the J100 phone with IP
Office with a limited feature set. The
second mode allows support of the
J100 phone with additional feature
support driven by the IP Office proxy.
Value Operation:
• 0: The phone does not support IP
Office (except in Avaya Aura failover
mode).
• 1: The phone supports IP Office in a
native environment.
• 2: The phone supports IP Office with
additional features driven by the IP
Office proxy
Avaya J129 IP Phone supports value
0 and 1.
Avaya J139 IP Phone and Avaya
J169/J179 IP Phone supports value 0
and 2.
Specifies that whether the Multiple
Level Precedence and Preemption
(MLPP) is enabled or not.
Value Operation:
• 0: Disabled.
• 1: Enabled.
Specifies if the list of contacts and the
function of the contacts application
can be modified on the phone.
Value Operation
• 0: No
• 1: Yes
Specifies if a warning message must
be displayed if there are multiple
phones registered on a user's behalf.
Value Operation:
• 0: No
• 1: Yes
Table continues...
135