Avaya J100 Series Installing And Administering page 173

Parameter name
TEAM_BUTTON_REDIRECT_INDICATION
TEAM_BUTTON_RING_TYPE
TIMEFORMAT
TLSDIR
TLSPORT
TLSSRVR
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
1
443
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
Specifies if the redirection indication
must be shown on a team button on
the monitored station, if it is not a
redirect destination of the monitored
station.
Value Operation
0: Disabled. The redirect indication is
shown only on a monitoring station
which is redirection destination.
1: Enabled. The redirection indication
is displayed on all monitoring stations
Note:
The Avaya J139 IP Phone does
not support this feature.
Specifies the alerting pattern to use for
team buttons.
Valid values are 1 through 8. The
default value is 1.
Note:
The Avaya J139 IP Phone does
not support this feature.
Specifies the format for time displayed
in the phone.
Value Operation
0: AM or PM format
1: 24h format
Specifies the HTTPS Server Directory
Path.
Valid values can contain 0 to 127
ASCII characters, without any spaces.
Specifies the TCP port used for
HTTPS file downloads from non-
Avaya servers.
Valid values are from 0 to 65535.
Specifies the HTTPS server address.
Valid values can contain 0 to 255
ASCII characters, including commas.
Table continues...
173