Avaya J100 Series Installing And Administering page 84

Configuring the phone using web interface
Name
Device Control
Device Performance
Monitoring
UDP Port for discovery and
test messages
Other
Serial Port
Port Mirroring
Related links
Debugging on page 80
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Description
• Controlled from Admin Menu
The default value is Disable.
Specifies whether the SLA Monitor agent supports device control.
The options are:
• Disable
• Enable
• Controlled from Admin Menu
The default value is Disable.
Specifies whether the SLA Monitor agent supports access to phone
performance data.
The options are:
• Enable
• Disable
The default value is Disable.
Specifies the port used to receive packets from an SLA Monitor server.
Valid values are 6000 through 65535.
The default value is 50011.
Specifies if the port for network traffic is enabled or disabled.
The options are:
• Enable
• Disable
The default value is Disable.
Specifies the status of port mirroring. Port mirroring is used to monitor
network traffic.
The options are:
• Off
• On
The default value is Off.
setup
Comments on this document? infodev@avaya.com
84