Avaya J100 Series Installing And Administering page 158

Appendix
Parameter name
PROVIDE_CF_RINGTONE
PROVIDE_KEY_REPEAT_DELAY
PROVIDE_LOGOUT
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
0
0
setup
Comments on this document? infodev@avaya.com
Description
Value Operation
• 0: Local procedures can be used
(default).
• 1: Local procedures cannot be used.
Specifies if the call forward ringtone
option is provided to the user.
Value Operation
• 0: The call forward ringtone option is
not provided (default).
• 1: The call forward ringtone option is
provided.
Specifies how long a navigation button
must be held down before it begins to
auto-repeat, and if an option is
provided by which the user can
change this value.
Value Operation
• 0: Default (500ms) with user option
(default).
• 1: Short (250ms) with user option.
• 2: Long (1000ms) with user option.
• 3: Very Long (2000ms) with user
option.
• 4: No Repeat with user option.
• 5: Default (500ms) without user
option.
• 6: Short (250ms) without user
option.
• 7: Long (1000ms) without user
option.
• 8: Very Long (2000ms) without user
option.
• 9: No Repeat without user option.
Specifies if user can log out from the
phone.
Value Operation
• 0: No
Table continues...
158