Avaya J100 Series Installing And Administering page 148

Appendix
Parameter name
LOG_DIALED_DIGITS
LOGSRVR
M
MATCHTYPE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
1
Null
0
setup
Comments on this document? infodev@avaya.com
Description
New categories for H1xx compare to
96x1 SIP include ANDROID and
KERNEL.
Specifies if the call log will contain
digits dialed by a user or information
about a remote party when the user
dials a FAC code.
The FAC code is identified by * or #
entered as a first character.
Value Operation
• 0: Allow dialed FAC code to be
replaced with a remote party number
in the call history
• 1: Dialed digits are logged in call
history exactly as they were entered
by the user (default).
Specifies one address for a syslog
server in dotted-decimal formatl
(IPv4), colon-hex format (IPv6, if
supported), or DNS name format.
The value can contain 0 to 255
characters.
Specifies how an incoming or outgoing
phone number is compared with the
contacts on the phone to display the
contact name.
0: Displays the contact name if all the
digits match.
1: Displays the contact name if all the
digits of the shorter number match
with the right-most digits of the longer
number. For example, a 5-digit
extension number can be matched
with the 8-digit phone number saved in
the contacts.
2: Displays the contact name if atleast
the last four digits match. If the
contacts are saved in multiple
sources, for example, Exchange, or
locally, the contact name saved first is
displayed.
Table continues...
148