Avaya J100 Series Installing And Administering page 137

Parameter name
ENABLE_REDIAL_LIST
ENABLE_SHOW_EMERG_SK
ENABLE_SHOW_EMERG_SK_UNREG
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
2
2
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
• 1: Yes
Specifies if the phone redials last
number or displays list of recently
dialed numbers.
Value Operation
• 0: Last number redial
• 1: Select the last number redial or
from the redial list.
Note:
The Avaya J139 IP Phone does
not support this feature.
Specifies if Emergency softkey, with
or without a confirmation screen, is
displayed when the phone is
registered. All emergency numbers
are always supported.
Value Operation
• 0: Emergency softkey is not
displayed.
• 1: Emergency softkey is displayed
without a confirmation screen.
• 2: Emergency softkey is displayed
with a confirmation screen.
Specifies if an Emergency softkey,
with or without a confirmation screen,
is displayed when the phone is not
registered.
All emergency numbers will always be
supported.
Value Operation
• 0: Emergency softkey is not
displayed.
• 1: Emergency softkey is displayed
without a confirmation screen.
• 2: Emergency softkey is displayed
with a confirmation screen.
Table continues...
137