Avaya J100 Series Installing And Administering page 164

Appendix
Parameter name
SCREENSAVER_IMAGE
SCREENSAVER_IMAGE_DISPLAY
SCREENSAVER_IMAGE_SELECTABLE
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
N/A
N/A
1
setup
Comments on this document? infodev@avaya.com
Description
If the value contains $SERIALNO, it is
replaced by the phone's serial number.
If the value contains $MACADDR, it is
replaced by the phone's MAC address
in hex.
Note:
• A password prompt is invoked
when SCEP is set for identity
certificate enrollment and the
parameter value is empty.
• This parameter must not be set
in a file that is accessible on an
enterprise network, and only in
a restricted staging
configuration.
Specifies the screen saver images
those can be loaded from the
provisioning server.
Maximum five custom images can be
uploaded onto the phone. Only
the .jpeg file format are supported and
the maximum file size is 256KB.
Note that the image file name is case
sensitive.
Allows the administrator to display the
desired screen saver image. Note that
If
BACKGROUND_IMAGE_SELECTAB
LE is set to 1 then the end user may
override this setting.
Allows the end user to select and
change the screen saver images.
Value operation:
• 0: End user can not select and
change the screen saver images
from the settings menu.
• 1: End user can select and change
the screen saver images from the
settings menu.
Table continues...
164