Avaya J100 Series Installing And Administering page 123

Parameter name
BRURI
C
CALL_TRANSFER_MODE
CALLFWDDELAY
CALLFWDSTAT
CERT_WARNING_DAYS
CERT_WARNING_DAYS_EASG
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
Null
0
1
0
60
365
setup
Comments on this document? infodev@avaya.com
Appendix A: List of configuration parameters
Description
• 6: 3db above nominal
• 5: nominal (default)
• 4: 3db below nominal
• 3: 6db below nominal
• 2: 9db below nominal
• 1:12db below nominal
Provides the capability to send a
phone report to a server with the URI
of the server defined by this
parameter. To send the report, go to
Main Menu > Admin > Debug >
Phone report.
Determines the call transfer mode in
3rd party environments. Valid value is
0 or 1.
Sets the number of ring cycles before
the call is forwarded to the forward or
coverage address. The default delay is
one ring cycle.
Sets the call forwarding mode of the
phone by summing following the
values:
• 1: Permits unconditional call
forwarding.
• 2: Permits call forward on busy.
• 4: Permits call forward/no answer.
• 0: Disables call forwarding.
Example: a value of 6 allows call
forwarding on busy and on no answer.
Specifies the number of days
remaining for certificate expiry. Valid
values are from 0 to 99.
Specifies how many days before the
expiration of EASG product certificate
that a warning should first appear on
the phone screen. Syslog message
will be also generated. Valid values
are from 90 to 730.
Table continues...
123