Avaya J100 Series Installing And Administering page 152

Appendix
Parameter name
OCSP_CACHE_EXPIRY
OCSP_ENABLED
OCSP_HASH_ALGORITHM
OCSP_NONCE
OCSP_TRUSTCERTS
OCSP_URI
OCSP_URI_PREF
August 2018 Installing and Administering Avaya J100 series IP Phones in third-party call control
Default
value
2880
0
0
1
Null
1
setup
Comments on this document? infodev@avaya.com
Description
• 1: Certificates are accepted.
Specifies the time interval for the
OCSP cache expiry in minutes. Valid
range is from 60 to 10080
Specifies that OCSP is used to check
the revocation status of the
certificates. Value operation:
• 0: Disabled.
• 1: Enabled for all peer TLS
connections on SIP, HTTPS, and
EAP-TLS.
Specifies the hashing algorithm for
OCSP request. Value operation:
• 0: SHA1
• 1: SHA256
Specifies that whether a nonce is
added in the OCSP requests and
expected in the OCSP responses.
Value operation:
• 0: Not added.
• 1: Added.
Specifies the list of OCSP trusted
certificates that are used as OCSP
signing authority for checking the
revocation status of the certificate.
This applies to when the OCSP
responder is using a different CA.
Specifies the single locally configured
IP address or an FQDN of an OCSP
responder. Embedded spaces are not
allowed. Valid range if from 0 to 255
ASCII characters.
Specifies the preferred URI for use in
an OCSP request when more than
one source is available. Value
operation:
• 1: Checks the OCSP_URI and then
the OCSP field of the Authority
Information Access (AIA) extension
of the certificate.
Table continues...
152