Valid Pci Card Configurations; Introduction - Avaya CallPilot 1006r Hardware Installation

1006r server description

Valid PCI card configurations

Introduction

There are three full size PCI-X card slots. Valid configurations of the PCI card slots are shown in
the table Table 1: 1006r PCI card slot configurations
Note:
Your server configuration depends on what was ordered from Avaya. Therefore, your server
may not have all of the slots populated.
When looking at the server from the rear (see
the PCI card slots are numbered from the top down.
Version
NTRH40CAE5
Table 1: 1006r PCI card slot configurations
Configuration
Single MPB96
Three MPB96
(High Capacity)
16 Avaya CallPilot® 1006r Server Hardware Installation
Description
Has three RJ-45 connectors on its faceplate:
Connects to the CS 1000 or Meridian 1 with three standard RJ-45
Ethernet cables
For more information about these cables and connecting the
NTRH40CAE5 MPB96 board to MGate cards, see Communication
Server and CallPilot Server Configuration(NN44200-312) or
Meridian 1 and CallPilot Server Configuration(NN44200-302).
Card slot Slot
type number
Full size FS_PCI-1
FS_PCI-2
FS_PCI-3
Note:
When cabling to MGate cards, the RJ-45 connectors are numbered
from 1 to 3 on the NTRH40CAE5 MPB96 board starting from the right
side of the back panel (next to the power supplies).
Full size FS_PCI-1
FS_PCI-2
FS_PCI-3
on page 16.
Back panel controls and features
Position Card type Meridian 1*/ CS*
top MPB96
middle Not used
bottom Not used
top MPB96
middle MPB96
bottom MPB96
on page 13),
1000
MGate 1, 2, 3
MGate 1, 2, 3
MGate 4, 5, 6
December 2010