Neighbor Peer-Group (Creating) - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
commands
Platform
description

33.1.53 neighbor peer-group (creating)

Use this command to create the BGP peer group. The no form of the command deletes the
specified peer group and all its members.
neighbor peer-group-name peer-group
no neighbor peer-group-name peer-group
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Enable the BGP protocol.
router bgp
neighbor
Configure the BGP peer.
remote-as
neighbor
peer-group Create the BGP peer group.
(creating)
show ip bgp
Show the information of the BGP peer.
peer-group
Parameter
peer-group-name
No BGP peer group is created.
BGP configuration mode.
If multiple BGP peers use the same update policy, those peers can
be configured in the same peer group, so as to simplify the
configuration and boost operation efficiency.
DES-7210(config)# router bgp 65000
DES-7210(config-router)# neighbor Red-Giant peer-group
Command
router bgp
neighbor remote-as
Chapter 33 BGP4 Configuration Commands
Description
Name of the peer group of up to 32
characters
Description
Enable the BGP protocol.
Configure the BGP peer.
33-51