Network Connectivity Test Tool Configuration Commands; Configuration Related Commands; Ping - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
5
5.1

Configuration Related Commands

The network connectivity test tool configuration includes:


ping


traceroute

line-detect
5.1.1 ping
Use this command to test the connectivity of a network to locate the network connectivity
problem. The command format is as follows:
ping [vrf] [vrf-name] [ip] [ip-address [length length ] [ntimes times] [timeout seconds]
[data data] [source source]]
Parameter
description
Default
Command
mode
Chapter 5 Network Connectivity Test Tool Configuration Commands
Network
Tool
Commands
Parameter Description
vrf-name VRF name
ip-address Specifies an IPv4 address.
length Specifies the length of the packet to be sent.
times Specifies the number of packets to be sent.
timeout Specifies the timeout time.
data Specifies the data to fill in.
source Specifies the source IPv4 address.
Five packets with 100Byte in length are sent to the specified IP
address within specified time (2s by default).
Privileged mode.
Connectivity
Configuration
Test
5-1