Login Authentication - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.9

login authentication

In case the AAA is enabled, the authentication with the AAA server must be performed for
logon. Use this command to associate logon authentication method list. The no form of this
command is used to delete the logon authentication method list.
login authentication {default | list-name}
no login authentication {default | list-name}
Parameter
description
Command
mode
Usage
guidelines
Chapter 2 Switch Management Configuration Commands
N/A.
Line configuration mode.
If the AAA security server is not enabled, this command is used for
the local user authentication at logon. The user here means the one
configured with the username command.
The example below shows how to set the local user authentication on
VTY.
DES-7210(config)# no aaa new-model
DES-7210(config)# username test password 0 test
DES-7210(config)# line vty 0
DES-7210(config-line)# login local
Command Description
username Configure the local user information.
Parameter Description
default Name of the default authentication method list
list-name Name of the method list available
Line configuration mode.
If the AAA security server is enabled, this command is used for the
logon authentication with the specified method list.
2-7