Pim-Dm Configuration Commands; Pim-Dm Related Configuration Commands; Ip Pim Dense-Mode; Ip Pim Neighbor-Filter - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
39

39.1 PIM-DM Related Configuration Commands

PIM-DM protocol configuration includes following commands:


ip pim dense-mode



ip pim neighbor-filter



ip pim query-interval



ip pim state-refresh disable



ip pim state-refresh origination-interval

39.1.1 ip pim dense-mode
Use this command to enable PIM-DM on the interface. Use the no form of this command to
disable the function.
ip pim dense-mode
no ip pim dense-mode
Parameter
description
Default
configuration
Command
mode
Examples
PIM-DM Configuration
Commands
N/A.
Disabled.
Interface configuration mode.
DES-7210# configure terminal
DES-7210(config)# interface fastethernet 0/1
DES-7210(config-if)# ip pim dense-mode
Chapter 39 PIM-DM Configuration Commands
39-1