Ip Igmp Snooping Vlan Mdevice Learn Pim-Dvmrp - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands

16.1.20 ip igmp snooping vlan mdevice learn pim-dvmrp

To configure a device to listen to the IGMP query/dvmrp or PIM packets dynamically in order
to automatically identify a routing interface, execute the ip igmp snooping vlan mdevice
learn command in the global configuration mode. The no form of this command is used to
disable the dynamic learning.
ip igmp snooping vlan vid mdevice learn pim-dvmrp
no ip igmp snooping vlan vid mdevice learn pim-dvmrp
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Chapter 16 IGMP Snooping Configuration Commands
Global configuration mode.
A profile must be created first. After association, only the multicast
frames complying with this profile can be forwarded to this routing
interface.
The following example demonstrates how to associate a profile to a
multicast routing interface:
DES-7210(config)# ip igmp snooping vlan 1 mdevice interface
fastEthernet 0/1 profile 1
Command
ip igmp snooping vlan
mdevice interface
Parameter
vid
Disabled.
Global configuration mode.
With the source port check function enabled, the dynamic routing
interface learning function will improve the application flexibility of
IGMP snooping.
The following example demonstrates how to enable the dynamic
Description
Configure a multicast routing
interface.
Description
VLAN ID of a routing interface
16-17