Aaa Configuration Commands - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
45
45.1 ID Authentication Related Command
45.1.1
Use this command to enable AAA authentication 802.1x and configure the 802.1x user
authentication method list. The no form of this command is used to delete the 802.1x user
authentication method list.
aaa authentication dot1x {default | list-name} method1 [method2...]
no aaa authentication dot1x {default | list-name}
Parameter
description
Default
AAA
Commands
aaa authentication dot1x
Parameter Description
When this parameter is used, the following defined
default 802.1x user authentication method list is used as the
default method for user authentication.
Name of the 802.1x user authentication method list,
list-name
which could be any character string.
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Keyword
local
method
none
group
N/A
Chapter 45 AAA Configuration Commands
Configuration
Description
Use the local user name database for
authentication.
Do not perform authentication.
Use the server group for authentication.
At present, the RADIUS server group is
supported.
45-1